Bendix-commercial-vehicle-systems TR-3 INVERSION VALVES 8/11 Manuel d'utilisateur télécharger pdf

SD-03-4650

Bendix

TR-2

™

& TR-3

™

Inversion Valves

DESCRIPTION

GENERAL

The Bendix

TR-2

™

& TR-3

™

valves are normally open,

pilot-operated, inverting, on-off, two-way valves. As control

pressure is reduced—to the point that the piston return

spring or springs overcomes the force on the control

piston—the valve will deliver full supply pressure at the

delivery port.

BENDIX

TR-2

™

INVERSION VALVE

Referring to Figure 1, the Bendix TR-2 valve was used

primarily in early Bendix

DD-3

™

safety actuator control

systems. It applied air pressure to the emergency

diaphragm of the DD-3 actuators from a protected reservoir

as control pressure is released from the lock mechanism.

The TR-2 valve is available in 1-1/4" bulk head-mount only.

BENDIX

TR-3

™

INVERSION VALVE

Referring to Figure 2, the Bendix TR-3 valve is similar in

function to the Bendix TR-2 valve, but with a die cast body.

Referring to Figure 3, some TR-3 valves have an internal

passage in the body connecting supply pressure to control.

The external control port is permanently plugged in such

valves.

OPERATION

BENDIX TR-2 & TR-3 INVERSION VALVES

When sufﬁ cient air pressure is present in the control cavity

to overcome the setting of the piston return spring, the

piston is held away from the inlet valve which is, in turn,

held closed by the inlet valve return spring. The delivery

lines are vented to atmosphere through the hollow exhaust

stem of the piston. When air pressure in the control cavity

falls to a predetermined pressure—or is vented from the

control cavity—the piston spring forces the piston against

the inlet valve, closing the exhaust passage in the hollow

piston stem. Further travel of the piston opens the inlet

valve allowing the passage of air past the open inlet valve,

and out the delivery port.

FIGURE 1 - BENDIX

TR-2

™

INVERSION VALVE

CONTROL PORT (3)

CAP SCREW

DELIVERY PORT (2)

CAP NUT

SEAL RING

PISTON

MOUNTING NUT

& LOCKWASHER

INLET & EXHAUST

VALVE

PISTON GROMMET

(SMALL)

PISTON GROMMET

(LARGE)

EXHAUST

DIAPHRAGM

COVER PLATE

DIAPHRAGM WASHER

RETAINER RING

PISTON SPRINGS

BODY

INLET & EXHAUST

VALVE SPRING

SUPPLY PORT

EXHAUST

1 2 3 4

Résumé du contenu

Page 1 - Inversion Valves

1 SD-03-4650Bendix® TR-2™ & TR-3™ Inversion ValvesDESCRIPTIONGENERALThe Bendix® TR-2™ & TR-3™ valves are normally open, pilot-operated,

Page 2 - OPERATING AND LEAKAGE TESTS

2FIGURE 2 - BENDIX® TR-3™ INVERSION VALVE FIGURE 3 - BENDIX® TR-3™ INVERSION VALVE INTERNAL BLEED CONTROLThe Bendix® TR-3™ valve, with the internal co

Page 3 - REMOVAL AND INSTALLATION

3NOTE: In the Bendix® TR-3™ valve shown in Figure 3, control pressure is reduced by decreasing supply air pressure because of the interna

Page 4

Plus de documents pour Équipement Bendix-commercial-vehicle-systems TR-3 INVERSION VALVES 8/11

Voir le document Bendix-commercial-vehicle-systems TR-3 INVERSION VALVES 8/11 Manuel d'utilisateur

Bendix-commercial-vehicle-systems TR-3 INVERSION VALVES 8/11 Manuel d'utilisateur (4 pages)

Commentaires sur ces manuels

Pas de commentaire

Bendix-commercial-vehicle-systems TR-3 INVERSION VALVES 8/11 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Bendix-commercial-vehicle-systems TR-3 INVERSION VALVES 8/11. Bendix Commercial Vehicle Systems TR-3 INVERSION VALVES 8/11 User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Équipement Bendix-commercial-vehicle-systems TR-3 INVERSION VALVES 8/11

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Bendix-commercial-vehicle-systems TR-3 INVERSION VALVES 8/11