Bendix-commercial-vehicle-systems SMARTIRE TPMS OPERATORS MANUAL Manuel d'utilisateur télécharger pdf (Page 22)

Gateway Sensor Learn

a. To have the Gateway Receiver detect a sensor’s ID, click the ‘Learn Selected

Sensor’ button in the SmarTire

™

Diagnostics Software.

b. You now need to trigger a Learn transmission from the tire within the next two

minutes (or press ESC to cancel). This can be done using the LF Initiator Tool,

LF Tool, or Maintenance Hand Tool.

Press the Learn button with the device in the appropriate position shown below.

Check the manual for the tool you are using to select the Learn function.

c. Once triggered, it can take up to 30 seconds for the Gateway to receive the

transmission and complete the learn process. When successful, the sensor icon

in the tire map will turn green and the detected ID will be displayed.

4. Perform the above steps for each sensor on the tire map.

5. Sensor programming is now complete and the sensors are stored on the Gateway

receiver.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Pas de commentaire

Bendix-commercial-vehicle-systems SMARTIRE TPMS OPERATORS MANUAL Manuel d'utilisateur Page 22